PotentiometersInclinometers & Tilt Angle Sensors
| Features | MEMSMiniatureDigital output User-friendly Functions (Digital Damper、Easy Resetting by Card) | |
|---|---|---|
| Output | Ouput Ratio | Serial (RS-485) |
| Elect. Travel | ±10、±20、±30、±45、±60° | ±30、±60° |
| Abso. Linearity | ±1.0%FS | |
| Input Voltage | DC5V | |
| Dimension | φ40×10 | |
| ESC1010ZA | ESC1020ZA | ESC1030ZA | ESC1045ZA | |
| Features | MEMS | |||
| Electrical Tilt Angle | ±10° | ±20° | ±30° | ±45° |
| Center Based Linearity | ±0.5%FS | ±1.0%FS | ±1.5%FS | ±2.5%FS |
| Input Voltege | DC5V | |||
| Dimension | 58x42x21mm | |||
Different electrical tilt angle between X and Y axis
*If you need something different from our standard models, please contact us.
Harbor Gantry Crane：Control/Body blance
Robot for maintenance of Infrastructure：Control/Robot posture
| Features | Drip-proofHigh Accuracy Current OutputDigital Output Robust, User-friendly Functons (Digital Damper, Easy Resetting by Card, etc.) | |||
| Output | Ratio | Voltage | Current | Serial (RS-485) |
| Electrical Tilt Angle | ±10°, ±20°, ±30°, ±45°, ±60°, ±80° | ±80° | ||
| Absolute Linearity | ±0.5%FS | ±0.1°(~±10°) ±0.2°(~±30°) ±0.5°(~±80°) | ||
| Input Voltege | DC5V | DC8~30V | DC24V | – |
| Dimension | 70x90x30mm | |||
*If you need something different from our standard models, please contact us.
Seat position testing equipment：Measurement/Seat position
Bulldozer：Control/Body position
Food processing machine：Control/Pich&Roll position
Hole-Digging machine：Control/Drilling bucket position
| PMP-10HTZL | PMP-5HTZL | PMP-20HTZL | PMP-30HTZL | |
| Features | Drip-proofRobust, Built-in PMP-SxxHT sensor, Dual Axis | |||
| Electrical Tilt Angle | ±10° | ±5° | ±20° | ±30° |
| Center Based Linearity | ±1%FS | |||
| Input Voltege | DC5V | |||
| Dimension | 49x92x60mm | |||
Narrower output voltage range
Different electrical tilt angle between X and Y axis
Single Axis
*If you need something different from our standard models, please contact us.
Large Dump Truck：Control/Truck position,Rated load
Excavator：Control/Body position
Aerial Work Platform：Control/Platform position
Pile Driver：Control/Pile position
Ground Surface Inclinometer：Measurement/Landslide,Debris flow
Container vessel：Control/Heel trim angle
| Features | MiniatureDrip-proofSpring-board pendulum mechanism |
| Electrical Tilt Angle | ±10° |
| Center Based Linearity | ±1%FS |
| Input Voltege | DC5V |
| Dimension | Φ20x40mm |
Narrower output voltage range
*If you need something different from our standard models, please contact us.
Leaderless Pile Driver：Control/Vertical position of pile
Maritime Satellite Antenna：Control/Antenna position
| UV-3HF | UV-00H | |
| Features | MiniatureDrip-proof Buoy-float pendulum mechanism | |
| Electrical Tilt Angle | ±20° | ±60° |
| Center Based Linearity | ±4%FS | ±2%FS |
| Input Voltege | DC5V | |
| Dimension | Φ23ｘ30mm | □30x40mm |
*If you need something different from our standard models, please contact us.
Fishing vessel：Control/Fish finder tilting
Nursing care bed：Control/Bed position
Barber chair：Control/Reclining position
Rear loader：Control/Tail gate lifter
| WR-7UHA | WR-7UHA360 | |
| Features | Drip-proofHigh Accuracy Robust, Pendulum mechanism | |
| Electrical Tilt Angle | ±60° | ±180° |
| Absolute Linearity | ±0.8%FS | ±0.4%FS |
| Input Voltege | DC5V | |
| Dimension | Φ61ｘ81mm | |
*If you need something different from our standard models, please contact us.
Crane, Aerial Work Platform：Control/Boom rolling angle,Jib angle
Excavator：Control/Vehicle angle
Conveyor：Control/Rolling angle
| Features | Drip-proofPendulum mechanism |
| Total Resistance | 0.5kΩ |
| Electctive Electrical Travel | 110°（CCW side 95°min., CW side 10°min.） |
| Total Accuracy | ±1% |
| Rated Dissipation | 0.33W/50℃ |
| Size | 80x50x60mm |
*If you need something different from our standard models, please contact us .
Crane, Aerial Work Platform：Control/Boom rolling angle
Dam gate：Control/Gate position
Car Ferry：Control/Gate position