Pickup Products
| Features | Compact／Low cost／Short lead time |
| Total Resistance | 1k, 15k, 10kΩ |
| Effective Electrical Travel | 340° |
| Independent Linearity | ±2%FS |
| Rated Dissipation | 0.5W／50℃ |
| Dimension | φ22.3mm |
| Shaft dia. | φ3.175 or φ6mm |
【Option】
Independent Linearity : ：±1%FS
*If you need something different from our standard models, please feel free to contact us.
【Applications】
Anemoscope：Measurement/Wind direction & force
Dental chair： Control/Chair position
Tire groove gauge： Measurement/Tire groove depth
Valve Positioner： Control/Valve position
| CP-2FB(x)J | CP-2FK(x)J | CP-2FC | |
| Features | MiniatureAbundant product lineup | ||
| Total Resistance | 1k, 2k, 5k, 10kΩ | 1k, 5kΩ | |
| Effective Electrical Travel | 340° | ||
| Independent Linearity | ±1%FS | ||
| Rated Dissipation | 0.5W/70℃ | ||
| Housing dia. | Φ22.3mm | ||
| Shaft dia. | Φ3.175, 6mm | Φ3.175mm | Φ3.175, 6mm |
*If you need something different from our standard models, please contact us .
【Applications】
Industrial Joystick： Control/Manipulating angle
Electrical Microscope：Control/X-Y axis position
Forklift：Control/Steering angle
Valve Positioner：Control/Valve position
| Features | High AccuracyDual Output |
| Total Resistance | 0.5k, 1k, 2k, 5k, 10k, 20kΩ |
| Effective Electrical Travel | 350° |
| Independent Linearity | ±0.1%FS |
| Rated Dissipation | 3W/70℃ |
| Housing dia. | φ45mm |
| Shaft dia. | φ4, φ6mm |
【Option】
Additional Center Taps :
For Output : CP-45F/45FB-CT(A) No shorted angle
For Input : CPP-45F/45FB-CT(B) Shorted on Tap ( Shorted angle approximately 3°)
Two Gangs / Output Phase
*If you need something different from our standard models, please contact us.
【Applications】
Autopilot：Control/Steering angle
Automobile Inspection Equipment：Measurement/Rotating angle of Steering wheel
Crane、Aerial work platform：Control/Pivoting angle
CT Scanning：Control/Scanning tilt
Electric Locomotive：Control/Speed adjusting lever
Wind Power：Control/Wind direction, Blade angle
| Features | Drip-proofHigh AccuracyDigital Output |
| Effective Electrical Travel | 18°~360° |
| Independent Linearity | ±0.2%FS(FS=360°) |
| Input Voltege | DC24V±8V |
| Housing dia. | φ36mm |
| Shaft dia. | φ6mm |
【Option】
Mouting Plate Type
*If you need something different from our standard models, please contact us.
【Applications】
Valve Positioner：Control/Valve position
Volume Flow Instrument：Control/Flow volume
Winding Machine：Control/Tension & Motor speed
| CP2HXCxxxRx CP2HXPxxxRx | CP2HXCxxxPx CP2HXPxxxPx | |
|---|---|---|
| Features | Drip-proofDual Output | |
| Effective Electrical Travel | ±180°(90) | |
| Absolute Linearity | ±2%FS | |
| Input Voltege | DC5V | |
| Output | Voltage Ratio | PWM |
| Housing Size | 30×33.5×7mm | |
| Shaft | Touchless type | |
Dual Parallel Output
*If you need something different from our standard models, please contact us.
| CP-1HX-xxR | CP-1HX-xxP | |
|---|---|---|
| Features | MiniatureDrip-proofDual Output | |
| Effective Electrical Travel | ±180°(50) | |
| Absolute Linearity | ±2%FS | |
| Input Voltege | DC5V | |
| Output | Voltage Ratio | PWM |
| Housing Size | 14×18×4.4mm | |
| Shaft dia. | Φ6mm | |
Inverse Output : Increase CCW
*If you need something different from our standard models, please contact us.
| Features | MiniatureDrip-proofDual OutputLow torque |
| Effective Electrical Travel | ±170° |
| Absolute Linearity | ±1%FS |
| Input Voltege | DC5V |
| Housing dia. | φ22.4mm |
| Shaft dia. | φ6mm |
【Option】
Special Elect. Travel : 90~359°
Output :Dual Output (4 wires)
Shaft dia. :φ3.175mm（D-Cut)
Bearing : Ball Bearing
Drip proof : Dust and Drip proof (Mounting surface side only) *If you need something different from our standard models, please contact us.
【Applications】
CAR Driving Simulator：Control/Lever position,Pedal angle,Steering angle
Servo Actuator：Control/Rotary position
Packing Machine：Control/Tension & Motor speed
Hydro Pump system：Control/Piston operarion
| Features | Drip-proofMulti-TurnDual Output |
| Effective Electrical Travel | ±900~9,000° |
| Absolute Linearity | ±1%FS |
| Input Voltege | DC5V |
| Dimension | 22×30×44mm |
| Shaft dia. | φ6mm |
*If you need something different from our standard models, please contact us.
【Applications】
Forklift、AGV：Control/Pallet position & Steering angle
Driver Assistance system：Brake control system
Leisure Boat Engine system：Control/Steering angle
LP-100F-63 LP-150F-63 LP-200F-63 LP-250F-63 | LP-300F-63 | |
| Resistance | 1, 2, 5, 10kΩ | 5, 10kΩ |
| Effective Electrical Travel | 100mm 150mm 200mm 250mm | 300mm |
| Independent Linearity | ±0.3%FS | |
| Rated Dissipation | 2W/70℃ | 4W/70℃ |
| Housing dia. | Φ22.2mm | |
| Shaft dia. | 5mm tip rod end | |
【Option】
Independant linearity：±0.1%FS
*If you need something different from our standard models, please contact us.
| WR-7UHA | WR-7UHA360 | |
| Features | Drip-proofHigh Accuracy Robust, Pendulum mechanism | |
| Electrical Tilt Angle | ±60° | ±180° |
| Absolute Linearity | ±0.8%FS | ±0.4%FS |
| Input Voltege | DC5V | |
| Dimension | Φ61ｘ81mm | |
*If you need something different from our standard models, please contact us.
Crane, Aerial Work Platform：Control/Boom rolling angle,Jib angle
Excavator：Control/Vehicle angle
Conveyor：Control/Rolling angle
| Features | MEMSMiniatureDigital output User-friendly Functions (Digital Damper、Easy Resetting by Card) | |
|---|---|---|
| Output | Ouput Ratio | Serial (RS-485) |
| Elect. Travel | ±10、±20、±30、±45、±60° | ±30、±60° |
| Abso. Linearity | ±1.0%FS | |
| Input Voltage | DC5V | |
| Dimension | φ40×10 | |
| Features | Drip-proofHigh Accuracy Current OutputDigital Output Robust, User-friendly Functons (Digital Damper, Easy Resetting by Card, etc.) | |||
| Output | Ratio | Voltage | Current | Serial (RS-485) |
| Electrical Tilt Angle | ±10°, ±20°, ±30°, ±45°, ±60°, ±80° | ±80° | ||
| Absolute Linearity | ±0.5%FS | ±0.1°(~±10°) ±0.2°(~±30°) ±0.5°(~±80°) | ||
| Input Voltege | DC5V | DC8~30V | DC24V | – |
| Dimension | 70x90x30mm | |||
*If you need something different from our standard models, please contact us.
Seat position testing equipment：Measurement/Seat position
Bulldozer：Control/Body position
Food processing machine：Control/Pich&Roll position
Hole-Digging machine：Control/Drilling bucket position
| Features | Drip-proofMulti-TurnHigh AccuracyDigital OutputCan be used under Oil-mist condition. | ||
| Model | Single-turn（ST）type | Multi-turn (MT) type | |
|---|---|---|---|
| Resolution | 17bit/rev. (131072 counts per rev.) | 17bit/rev.×16bit ((131072 counts×65536 rev.) | |
| Accuracy | ±0.044°(13bit equivalent) | ||
| Size | φ58×27.5mm | ||
| Shaft ID | φ15 | ||
| IP Rating | IP50/IP65 | ||
*If you need something different from our standard models, please contact us.